Front Door Spruce-Up
At 20 plus years, my front door was really looking shabby. As a realtor, I've heard time & time again how important first impressions are, and not wanting to go to the trouble and expense of replacing the door, I decided to try and paint it myself. What could I lose?
On a nice day, I removed the door from its hinges and put it on saw horses in the garage and removed the hinges, doorknob and deabolt hardware. I then took some steel wool and fine sandpaper and sanded down any areas that were rusty. If necessary, you might have to spray some primer on more severly rusted areas before you paint it. Mine was not that bad, so I just cleaned the door really well to remove any sanding grit.
I used a glossy appliance paint (make sure it is made for metal), but I think flat paint would look good too. I sprayed 2 even coats on each side of the door, allowing the time to dry in between coats as directed on the can. If you don't have enough time to do the whole door in one day, finish one side and do the other another day.
I'm really pleased with the results and it felt good to have a door that looks almost like new and only cost a few bucks for a couple cans of paint!
P.S. Make sure you wear a mask when spraying and cover anything in your garage that you don't want to get a haze of paint on it, the mist does spread quite a bit. I sprayed with the door open (and made sure my car and my neighbors cars were not in harms way) and closed it while it was drying so as not to have anything float in and land on the wet paint.
By Lanette Masseth