here is your debate. I dont beleive that 9 11 was an inside job, that is not the first time a building has been brought down by fire, do u know how hot jet fuel burn, do u know at what temp structural steel looses its ablilty to support all that weight. in 2001 there were cell phones that worked at 30,000 ft, ever seen the phones in the back of the seats on the airplains, thats right they are cell phones. And im just as pissed as u r that congress past the bailout, im still wondering what i would have to do to get them to bail me out on my truck payment, bet that never happens. and yes i do beleive that every member of congress is a lieing, cheating, money gubing, peice of sh!t. But I also beleive that if they dont change there ways and soon, the American people will rise up and rebell, and when we do, it wont be pretty, but it will be bloody, barack HUSSAIN obama says we r just small towners clinging to our religion and guns, well I say all of congress and all the lobyist in washington are soon to see why we are clinging to our guns!!!!!!!!!!!!!!!!! 

yeah if you continue to listen to the official story spread by corporate news listen to the designers, demolition experts, engineers and other experts. there are so many discrepancies to the story. wtc 1 & 2 were hit but not wtc 7. so how did a steel and concrete structure have a

 my problem is that it fell into its own footprint at free fall speed. that the designers stated that they had designed the buildings to take a hit from a plane. they had said that maybe even multiple hits could not bring it down.

here

Fact. The twin towers were designed to withstand a collision with a Boeing 707.

The maximum takeoff weight for a Boeing 707-320B is 336,000 pounds.
The maximum takeoff weight for a Boeing 767-200ER is 395,000 pounds.

The wingspan of a Boeing 707 is 146 feet.
The wingspan of a Boeing 767 is 156 feet.

The length of a Boeing 707 is 153 feet.
The length of a Boeing 767 is 159 feet.

The Boeing 707 could carry 23,000 gallons of fuel.
The Boeing 767 could carry 23,980 gallons of fuel.

The cruise speed of a Boeing 707 is 607 mph = 890 ft/s,
The cruise speed of a Boeing 767 is 530 mph = 777 ft/s.

So, the Boeing 707 and 767 are very similar aircraft, with the main differences being that the 767 is slightly heavier and the 707 is faster.

In designing the towers to withstand the impact of a Boeing 707, the designers would have assumed that the aircraft was operated normally. So they would have assumed that the aircraft was traveling at its cruise speed and not at the break neck speed of some kamikaze. With this in mind, we can calculate the energy that the plane would impart to the towers in any accidental collision.

The kinetic energy released by the impact of a Boeing 707 at cruise speed is
= 0.5 x 336,000 x (890)^2/32.174
= 4.136 billion ft lbs force (5,607,720 Kilojoules).

The kinetic energy released by the impact of a Boeing 767 at cruise speed is
= 0.5 x 395,000 x (777)^2/32.174
= 3.706 billion ft lbs force (5,024,650 Kilojoules).

From this, we see that under normal flying conditions, a Boeing 707 would smash into the WTC with about 10 percent more energy than would the slightly heavier Boeing 767. That is, under normal flying conditions, a Boeing 707 would do more damage than a Boeing 767.

In conclusion we can say that if the towers were designed to survive the impact of a Boeing 707, then they were necessarily designed to survive the impact of a Boeing 767.

So what can be said about the actual impacts?

The speed of impact of AA Flight 11 was 470 mph = 689 ft/s.
The speed of impact of UA Flight 175 was 590 mph = 865 ft/s.

The kinetic energy released by the impact of AA Flight 11 was
= 0.5 x 395,000 x (689)^2/32.174
= 2.914 billion ft lbs force (3,950,950 Kilojoules).

This is well within limits that the towers were built to survive. So why did the North tower fall?

The kinetic energy released by the impact of UA Flight 175 was
= 0.5 x 395,000 x (865)^2/32.174
= 4.593 billion ft lbs force (6,227,270 Kilojoules).

This is within 10 percent of the energy released by the impact of a Boeing 707 at cruise speed. So, it is also a surprise that the 767 impact caused the South tower to fall.

Overall, it comes as a great surprise that the impact of a Boeing 767 bought down either tower. Indeed, many experts are on record as saying that the towers would survive the impact of the larger and faster Boeing 747. In this regard, see professor Astaneh-Asl's simulation of the crash of the much, much larger and heavier Boeing 747 with the World Trade Center. Professor Astaneh-Asl teaches at the University of California, Berkeley.

Although the jet fuel fires have been ruled out as the cause of the collapses, it should still be pointed out that the fuel capacities of the Boeing 707 and the Boeing 767 are essentially the same. And in any case, it has been estimated that both UA Flight 175 and AA Flight 11 were carrying about 10,000 gallons of fuel when they impacted. This is well below the 23,000 gallon capacity of a Boeing 707 or 767. Thus the amount of fuel that exploded and burnt on September 11 was envisaged by those who designed the towers. Consequently, the towers were designed to survive such fires. It should also be mentioned that other high-rise buildings have suffered significantly more serious fires than those of the twin towers on September 11, and did not collapse.

how about this a fire in 1975

That the 1975 fire was more intense than the 9/11 fires is evident from the fact that it caused the 11th floor east side windows to break and flames could be seen pouring from these broken windows. This indicates a temperature greater than 700°C. In the 9/11 fires the windows were not broken by the heat (only by the aircraft impact) indicating a temperature below 700°C. So now you know that the WTC towers were well designed and quite capable of surviving a serious fire. I repeat that this was a very hot fire that burnt through the open-plan office area of the eleventh floor and spread up and down the central core area for many floors. This was a serious fire. Much was learned from the 1975 WTC fire. In particular, the fact that the fire had not been contained to a single floor but spread to many floors, caused much concern. The points of entry of the fire to other floors were identified and the floors of each building were modified to make sure that this would never happen again. For some strange reason, the modifications failed to perform on September 11, 2001 and again the fires spread from floor to floor.

well I got work to do!

"well I got work to do"!

Don't work up too much a sweat beating that dead horse. Lol.

mahalo for the respect. the temp only reaches in the open air to around 7oo t0 850 degrees. plus no other building has had a total collapse do to fire alone ever! the cell phone thing I did no research on so you may very well be right. has the rest of the post I feel we are on the same track. question is when will we draw the line and say NO more! obama is the worst choice for our country period! but mcsame is a close second.neither one gives a rats a%% about america or the american people!

In combustion science, there are three basic types of flames, namely, a jet burner, a pre-mixed flame, and a diffuse flame. A jet burner generally involves mixing the fuel and the oxidant in nearly stoichiometric proportions and igniting the mixture in a constant-volume chamber. Since the combustion products cannot expand in the constant-volume chamber, they exit the chamber as a very high velocity, fully combusted, jet. This is what occurs in a jet engine, and this is the flame type that generates the most intense heat.

In a pre-mixed flame, the same nearly stoichiometric mixture is ignited as it exits a nozzle, under constant pressure conditions. It does not attain the flame velocities of a jet burner. An oxyacetylene torch or a Bunsen burner is a pre-mixed flame.

In a diffuse flame, the fuel and the oxidant are not mixed before ignition, but flow together in an uncontrolled manner and combust when the fuel/oxidant ratios reach values within the flammable range. A fireplace flame is a diffuse flame burning in air, as was the WTC fire.

Diffuse flames generate the lowest heat intensities of the three flame types.

If the fuel and the oxidant start at ambient temperature, a maximum flame temperature can be defined. For carbon burning in pure oxygen, the maximum is 3,200°C; for hydrogen it is 2,750°C. Thus, for virtually any hydrocarbons, the maximum flame temperature, starting at ambient temperature and using pure oxygen, is approximately 3,000°C.

This maximum flame temperature is reduced by two-thirds if air is used rather than pure oxygen. The reason is that every molecule of oxygen releases the heat of formation of a molecule of carbon monoxide and a molecule of water. If pure oxygen is used, this heat only needs to heat two molecules (carbon monoxide and water), while with air, these two molecules must be heated plus four molecules of nitrogen. Thus, burning hydrocarbons in air produces only one-third the temperature increase as burning in pure oxygen because three times as many molecules must be heated when air is used. The maximum flame temperature increase for burning hydrocarbons (jet fuel) in air is, thus, about 1,000°C-hardly sufficient to melt steel at 1,500°C.

But it is very difficult to reach this maximum temperature with a diffuse flame. There is nothing to ensure that the fuel and air in a diffuse flame are mixed in the best ratio. Typically, diffuse flames are fuel rich, meaning that the excess fuel molecules, which are unburned, must also be heated. It is known that most diffuse fires are fuel rich because blowing on a campfire or using a blacksmith's bellows increases the rate of combustion by adding more oxygen. This fuel-rich diffuse flame can drop the temperature by up to a factor of two again. This is why the temperatures in a residential fire are usually in the 500°C to 650°C range.^2,3 It is known that the WTC fire was a fuel-rich, diffuse flame as evidenced by the copious black smoke. Soot is generated by incompletely burned fuel; hence, the WTC fire was fuel rich-hardly surprising with 90,000 L of jet fuel available. Factors such as flame volume and quantity of soot decrease the radiative heat loss in the fire, moving the temperature closer to the maximum of 1,000°C. However, it is highly unlikely that the steel at the WTC experienced temperatures above the 750-800°C range. All reports that the steel melted at 1,500°C are using imprecise terminology at best.

Some reports suggest that the aluminum from the aircraft ignited, creating very high temperatures. While it is possible to ignite aluminum under special conditions, such conditions are not commonly attained in a hydrocarbon-based diffuse flame. In addition, the flame would be white hot, like a giant sparkler. There was no evidence of such aluminum ignition, which would have been visible even through the dense soot.

It is known that structural steel begins to soften around 425°C and loses about half of its strength at 650°C.⁴ This is why steel is stress relieved in this temperature range. But even a 50% loss of strength is still insufficient, by itself, to explain the WTC collapse. It was noted above that the wind load controlled the design allowables. The WTC, on this low-wind day, was likely not stressed more than a third of the design allowable, which is roughly one-fifth of the yield strength of the steel. Even with its strength halved, the steel could still support two to three times the stresses imposed by a 650°C fire.

The additional problem was distortion of the steel in the fire. The temperature of the fire was not uniform everywhere, and the temperature on the outside of the box columns was clearly lower than on the side facing the fire. The temperature along the 18 m long joists was certainly not uniform. Given the thermal expansion of steel, a 150°C temperature difference from one location to another will produce yield-level residual stresses. This produced distortions in the slender structural steel, which resulted in buckling failures. Thus, the failure of the steel was due to two factors: loss of strength due to the temperature of the fire, and loss of structural integrity due to distortion of the steel from the non-uniform temperatures in the fire.